Omron E5C User Manual page 279

sb1n
sb2n
sb3n
sb4n
• This parameter sets the output status of auxiliary outputs 1 to 4.
• When Close in Alarm is set, the status of the auxiliary output function is output
unchanged. When Open in Alarm is set, the status of the auxiliary output function is
Function
reversed before being output. The following table shows the relationship between the
auxiliary output function, auxiliary output, and operation displays (SUB1 to SUB4).
Setting
Related Parameters
See
See
Auxiliary Output 1 to 4 Assignment (Advanced Function Setting Level): Page 6-79
hbu
• Set to use the heater burnout alarm.
Function
Setting
E5@C Digital Temperature Controllers User's Manual (H174)
Auxiliary Output 1 Open in Alarm
Auxiliary Output 2 Open in Alarm
Auxiliary Output 3 Open in Alarm
Auxiliary Output 4 Open in Alarm
Auxiliary output
function
Close in ON
Alarm OFF
ON
Open in
Alarm
OFF
Setting range
n-o: Close in alarm, n-c: Open in alarm
HB ON/OFF
Setting range
on: Enabled, off: Disabled
Auxiliary output 1 must be assigned.
Auxiliary output 2 must be assigned.
Auxiliary output 3 must be assigned.
Auxiliary output 4 must be assigned.
Auxiliary output
ON
OFF
OFF
ON
Default
n-o
HB and HS alarms must be supported.
Default
on
6 Parameters
Operation display
(SUB1 to SUB4)
Lit
Not lit
Lit
Not lit
6 - 63
6