Omron E5C User Manual page 277

init
• This parameter returns all parameter settings to their defaults.
• After the initialization, the set value automatically turns OFF.
Function
Setting
mspu
This parameter sets the number of Multi-SP points that will be used with key operations
(none or 2 to 8).
Function
OFF, 2 to 8
Setting
spru
• This parameter sets the time unit for the rate of change during SP ramp operation.
Function
Setting
Related Parameters
See
See
Ramp SP Monitor (Operation Level): 6-10
SP Ramp Set Value and SP Ramp Fall Value (Adjustment Level): Page 6-33
E5@C Digital Temperature Controllers User's Manual (H174)
Parameter Initialization
off:
Initialization is not executed.
fact:
Initializes to the factory settings described in the manual.
Number of Multi-SP Points
Setting range
SP Ramp Time Unit
Setting range
s: EU/s, m: EU/min, h: EU/h
Setting range
The Controller must not have event inputs or the
Event Input Assignment 1 to Event Input
Assignment 6 parameters must not be set to
"Multi-SP No. switching bit 0" to "Multi-SP No.
switching bit 2."
Default
OFF
The ST parameter must be set to OFF.
Default
m
6 Parameters
Default
off
6
6 - 61