Omron E5C User Manual page 232

6 Parameters
o
This parameter is used to monitor the manipulated variable for the heating control output during opera-
tion.
• During standard control, the manipulated variable is monitored. During heating/cooling
control, the manipulated variables on the control output (heating) is monitored.
• The default is OFF and the manipulated variable is not displayed.
Function
Monitor
Related Parameters
See See
MV Display (Advanced Function Setting Level): Page 6-67
c-o
This parameter is used to monitor the manipulated variable for the cooling control output during opera-
tion.
• During heating/cooling control, the manipulated variable on the control output (cooling) is
monitored.
• The default is OFF and the manipulated variable is not displayed.
Function
Monitor
Related Parameters
See
See
Standard or Heating/Cooling (Initial Setting Level): Page 6-45
MV Display (Advanced Function Setting Level): Page 6-67
6 - 16
MV Monitor (Heating)
Control Monitor range
−5.0 to 105.0
Standard
Heating/cooling 0.0 to 105.0
MV Monitor (Cooling)
Control Monitor range
Heating/cooling 0.0 to 105.0
The MV Display parameter must be set to ON.
Unit
%
%
The control system must be set to heating/cooling
control.
The MV Display parameter must be set to ON.
Unit
%
E5@C Digital Temperature Controllers User's Manual (H174)