Omron E5C User Manual page 269

tr-t
• This parameter sets the transfer output type.
Function
OFF
Setting
Set point
Set point during SP ramp
PV
MV (heating)
MV (cooling)
Valve opening
*1 The remote SP will be output while the SP Mode parameter is set to the Remote SP Mode.
*2 This function can be set for a Position-proportional Model, but the setting will be disabled.
*3 This function can be set for standard control or for a Position-proportional Model, but the setting
will be disabled.
*4 This setting is displayed only for a Position-proportional Model.
Related Parameter
See
See
Transfer Output Upper Limit and Transfer Output Lower Limit (Initial Setting Level): Page
6-54
E5@C Digital Temperature Controllers User's Manual (H174)
000
Transfer Output Type
Transfer output type
*1
*2
*3
*4
There must be a transfer output.
Default
off off
sp
sp-m
pV
mV
c-mV
v-m
6 Parameters
6
6 - 53