Ricoh A219 Service Manual page 372

SP 72 (UP 12) Registering User Numbers:
Function: Registers user numbers.
The user number (1-10) is displayed in the copy counter. Code numbers are
displayed in the three digit indicator (Zoom, %). To change the user code numbers,
use the Zoom key.
Procedure:
1. Access mode number 72 in SP mode (12 for UP mode).
2. "1" is displayed in the copy counter. A 3-digit number can be displayed in the
three digit indicator(Zoom,%). Press the Zoom Up(+) key or Zoom Down (-) key
to see the next user codes.
3. Enter the new user code with number keys. This can be a 3-digit number from 1
to 999.
4. Press the Auto Image Density key. The old user code is then changed to the new
code.
5. To exit from the User Tools, turn the main switch off and on.
Note: User codes are set to "0" when the machine is shipped from the factory.
SP 73 ( UP 8) User Code Counter Check:
Function:
Displays the copy counter value for each user number registered.
The user number (1-10) is displayed in the copy counter and the corresponding total
copy counter value is displayed in the 3-digit indicator (Zoom,%). Using the Zoom
key (up:+,down:-), you can view how many copies each registered user has made.
Procedure:
1. Access mode number 73 (number 8 for UP mode).
2. "1" is displayed in the copy counter.
3. At first, only 3 digits are displayed in the 3-digit indicator (6th, 5th and 4th).
4. After you press the "Darker" key, the next 3 digits will be displayed (3rd, 2nd and
1st).
5. To exit, press the Auto Image Density key and turn the main switch off and on.
SM
CÓPIA NÃO CONTROLADA
User Numbers:
1 - 10
12-5
CÓPIA NÃO CONTROLADA
User code:
1-999
B019