Table of Contents
Advertisement
PROGRAM MODES
Mode No.
Output Check
Use to turn on individual electrical components.
Enter the desired number given in the following
table.
Press the
component.
Press the
component.
Component
9
Scanner Free
Start a scanner free run.
Run
Press the
10
Press the
This mode is performed in accordance with the
selected paper size and magnification ratio.
All Indicators
Turns on all the indicators on the operation panel for
On
30 seconds. They will turn off automatically after 30
11
seconds.
To turn off the indicators, press the
A219
CÓPIA NÃO CONTROLADA
Function
!
$
key to turn on the electrical
key to turn off the electrical
Electrical Component
No.
Main Motor + Quenching
1
Lamp + Exhaust Fan
Motor (High Speed)
2
Charge Corona
3
Transfer Corona
4
Discharge Plate
Development Bias Voltage Standard Voltage for
5
6
Erase Lamp
Machine Shut Off
7
Exhaust Fan Motor
8
(High Speed)
9
Optics Cooling Fan
Exposure Lamp + Optics
10
Cooling Fan
11
Toner Supply Motor
Toner Supply Motor
12
(Reverse)
14
Sorter Roller Drive Motor
Sorter Bin Drive Motor
15
(Bin Up)
Sorter Bin Drive Motor
16
(Bin Down)
17
Registration Clutch
18
By-pass Paper Feed Clutch
19
Tray Paper Feed Clutch
21
Relay Roller Clutch
23
Total Counter
24
Key Counter
!
$
key to start the free run.
key to stop the free run.
4-12
CÓPIA NÃO CONTROLADA
Settings
Note
Manual ID Level 4.
All LEDs On
Main Switch Relay
Off.
Moves One Bin Up.
Moves One Bin
Down.
Advances count
Not Used
key.
SM
Advertisement
Table of Contents
