Ricoh A219 Service Manual page 343

PROGRAM MODE
Mode No.
Auto Shut Off Selects the "Automatic Shut off" mode.
(Energy Star)
The copier automatically shuts itself off at the auto
77 On/Off
shut off time selected (SP14).
Auto Energy Selects the "Automatic Energy Saver" mode.
78 Saver Mode
The copier automatically goes to Energy Saver
On/Off
mode at the auto reset time selected (SP15).
Factory Factory use only.
81
Initialization
Data Factory use only.
82
Communication
Factory Factory use only.
83 Potential
Adjustment
Total Copy Displays the total (electrical) copy counter.
Counter
The first three digits are displayed in the
Display
magnification indicator.
Press the
88
The mechanical total counter and the electrical
total counter may not always display the same
value, because of initial differences in the
counter values.
Factory Data Factory use only.
90 and Counter
Clear
User Code Resets all the user code counters (SP73).
*
92 Counter Clear
To clear, enter "1" then press the
V Correction Resets the drum residual voltage correction counter
R
*
Reset for the VR correction.
93 To clear, enter "1" then press the
Use this mode only after installing a new drum.
V Correction Resets the exposure lamp data and counter for the
L2
Reset V
L2
*
as a set.
94 To Clear, enter "1" then press the
Normally not needed in the field, as this is handled
by SP48.
V Correction Resets the exposure lamp data and counter for the
L
Reset V
L
*
as a set.
95 To clear, enter "1" then press the
Normally not needed in the field, as this is handled
by SP48.
A245
CÓPIA NÃO CONTROLADA
Function
*
key to view the last three digits.
key at the same time.
key at the same time.
correction. Always perform this mode with SP95
key at the same time.
correction. Always perform this mode with SP94
key at the same time.
11-36
CÓPIA NÃO CONTROLADA
Settings
0: Yes
1: No
Default = 0 (NA)
Default = 1
(Others)
0: No
1: Yes
0: No
1: Yes
key and the
0: No
1: Yes
key and the
0: No
1: Yes
key and the
0: No
1: Yes
key and the
SM