Ricoh A219 Service Manual page 339

PROGRAM MODE
Mode No.
Light Intensity Clean the optics, then adjust the exposure lamp
Adjustment † voltage. The V
automatically when entering this mode.
SP Setting
48
Before performing this mode, clean the optics.
Then open SP33 and return the setting to the
normal value if it has been changed. Then adjust
the light intensity using an OS-A3 Test Chart with
the platen cover placed over it. After adjusting the
light intensity, adjust the ADS Reference Voltage
Adjustment (SP56).
See "Replacement and Adjustment - Copy Quality"
for details on how to do this adjustment.
Fusing Adjusts the control temperature of the hot roller
Temperature
during copying in 1°C steps.
Adjustment
49
Fusing Ready Adjusts the ready temperature of the hot roller
Temperature
during the warm-up period in 1°C steps.
Adjustment
Normally, this value should not be changed.
50
Exposure Displays the current exposure lamp voltage.
Lamp Voltage For 120 V machines, the actual applied
Display voltage = displayed value/2
51
The exposure lamp turns on for 10 seconds when
this mode is selected. Do not repeat more than 5
times, to avoid overheating the optics cavity.
A245
CÓPIA NÃO CONTROLADA
Function
and V corrections are reset
L L2
Lamp Voltage (V)
120 V (NA) Version
100 50.0
101 50.5
102 51.0
↓
Å
150 75.0
↓
Å
180 90.0
↓
Å
193 96.5
194 97.0 Max
11-32
CÓPIA NÃO CONTROLADA
Settings
120 V Machines
100 ~ 194
Default = 140
230 V Machines
100 ~ 180
230 V (EU) Version
Default = 140
100
101
102
↓
150
↓
180 Max
—
—
—
120 V Machines
180°C ~ 195°C
Default = 190°C
230 V Machines
180°C ~ 200°C
Default = 190°C
120 V Machines
160°C ~ 175°C
Default = 172°C
230 V Machines
165°C ~ 180°C
Default = 177°C
0 ~ 247
SM