Ricoh A219 Service Manual page 138

Mode No.
Horizontal Adjusts magnification perpendicular to the direction
Magnification of paper travel, by changing the home position of
Adjustment the lens and mirrors.
0.2% per step (–4.0% to +6.0%).
44
Check the focusing after doing this SP mode, and
adjust with SP47 if necessary.
See "Replacement and Adjustment - Copy Quality
Adjustment" for details.
Registration Adjusts the amount of paper buckle in the
45 Buckle registration area.
Adjustment
0.5 mm per step (–4.0 mm to +3.5 mm).
Registration When feeding A5 sideways paper, the registration
Buckle buckle can be adjusted separately from the SP45
46
Adjustment - setting to reduce the buckle.
A5 Paper
0.5 mm per step (0 mm to –5.0 mm).
Focus Adjusts the 4th/5th mirror position to correct the
Adjustment focus.
This mode must be done after vertical and
47
horizontal magnification adjustments (SP43 and
SP44).
See "Replacement and Adjustment - Copy Quality"
for details on how to do this adjustment.
Light Intensity Clean the optics, then adjust the exposure lamp
Adjustment voltage. The V
automatically when entering this mode.
SP Setting
48
Before performing this mode, clean the optics.
Then open SP33 and return the setting to the
normal value if it has been changed. Then adjust
the light intensity using an OS-A3 Test Chart with
the platen cover placed over it. After adjusting the
light intensity, adjust the ADS Reference Voltage
Adjustment (SP56).
See "Replacement and Adjustment - Copy Quality"
for details on how to do this adjustment.
SM
CÓPIA NÃO CONTROLADA
Function
and V corrections are reset
L L2
Lamp Voltage (V)
120 V (NA) Version
100 50.0
101 50.5
102 51.0
↓ ↓
150 75.0
↓ ↓
180 90.0
↓ ↓
193 96.5
194 97.0 Max
4-17
CÓPIA NÃO CONTROLADA
PROGRAM MODES
Settings
0 ~ 50
Default = 20
0 ~ 15
Default = 8
Default = 0
0 ~ 100
Default = 40
(0.1 mm per
step)
120 V Machines
100 ~ 194
Default = 140
230 V Machines
100 ~ 180
230 V (EU) Version
Default = 140
100
101
102
↓
150
↓
180 Max
—
—
—
A219