Ricoh A219 Service Manual page 111

DOCUMENT FEEDER (A662)
[C]
[F]
[G]
[H]
5. Insert the DF [A] into the holes [B] in the copier upper cover.
6. Secure the DF to the copier (2 thumb screws [C]).
7. Remove the rear cover [D] (2 screws) and cut away the portion [E] with
cutting pliers as shown.
8. Locate the 4P connector [F] and connect it to the ADF interface board
[G], then secure the DF interface unit [H] to the copier (1 screw).
9. Plug the connector [I] (3P) in to CN202 on the ac drive dc power supply
board [J].
A219
CÓPIA NÃO CONTROLADA
[A]
[B]
A662I502.img
[J]
[I]
A662I504.wmf
3-10
CÓPIA NÃO CONTROLADA
[E]
A662I503.wmf
[D]
SM