Ricoh A219 Service Manual page 135

PROGRAM MODES
Mode No.
Toner Supply Selects the toner supply system.
Mode Selection Normally, this value should not be changed.
Setting
30
See SP31/SP32 for the toner supply amount.
Toner Supply Determines how much toner is supplied in detect
Amount supply mode.
(TD Sensor
Select the toner supply time from 0.0 s to 5.0 s in
31
Mode)
0.1 s steps.
See "Detailed Descriptions-Toner Supply Control"
for more details.
Toner Supply Determines how much toner is supplied in fixed
Amount supply mode and in detect supply (fixed amount)
(Fixed Supply mode.
Mode) For example, if the user normally makes copies of
A4 originals that are about 7% black, select the 7%
setting for best results.
32
See "Detailed Descriptions - Toner Supply Control"
for more details.
A219
CÓPIA NÃO CONTROLADA
Function
SP
Toner Supply System
Detect supply mode using
0 the initial TD sensor
setting.
Detect supply mode using
1 the target TD sensor
voltage set with SP53.
Detect supply mode (fixed
2 amount) using the initial
TD sensor setting.
Detect supply mode (fixed
amount) using the target
3
TD sensor voltage set
with SP53.
Fixed supply mode.
4
SP Supply
Ratio
Setting Time
0 3.5%
1 7.0%
2 15%
3 30%
4 45%
5 60%
6 —
7 0%
4-14
CÓPIA NÃO CONTROLADA
Note
Default
Use only in abnormal TD
sensor conditions.
Note
0.3 s Default
0.6 s
1.2 s
2.4 s
3.6 s
4.8 s
∞
Continuous supply
0 No toner supply
Settings
Default = 0
0 ~ 50
Default = 4
(0.4 s)
0 ~ 7
Default = 0
SM