Ricoh A219 Service Manual page 340

Mode No.
Fusing Displays the fusing temperature detected by the
Temperature fusing thermistor.
52
Display †
Press the
during the normal copy cycle.
TD Sensor If the setting of SP30 (Toner Supply Mode
Target Control Selection) is 1 or 3, this value is used for the TD
53
Voltage sensor target voltage.
Adjustment
Normally, this value should not be changed.
TD Sensor When the TD Sensor initial setting is performed, this
54 Gain mode is adjusted automatically.
Adjustment
Normally, this value should not be changed.
TD Sensor Displays the TD sensor output voltage.
Output Display
Press the
Data †
during the normal copy cycle.
55
The output voltage will display "0" when this mode is
accessed after turning on the main switch without
making any copies.
ADS Adjusts the ADS reference voltage.
Reference
After adjusting the light intensity (SP48), place 5
56 Voltage
sheets of A4(LT) white paper on the exposure glass
Adjustment
and select this mode. Adjust the ADS voltage to 2.5
V ± 0.1 V using VR101 on the main control board.
ADS Output Displays the ADS output voltage.
Voltage
Press the
57 Display †
during the normal copy cycle.
For only this SP mode, the copies are made with the
ADS mode (other SP modes use manual ID level 4).
Image Adjusts the image density at ID level 1 by changing
Adjustment at the development bias voltage.
ID Level 1
SP Setting
58
Optics Displays the optics temperature detected by the
Temperature optics thermistor.
59
Display †
Press the
during the normal copy cycle.
Drum Potential Factory use only.
60 Measurement
(With Paper)
Drum Potential Factory use only.
61 Measurement
(Without Paper)
SM
CÓPIA NÃO CONTROLADA
Function
!
key to monitor the temperature
!
key to monitor the output voltage
!
key to monitor the output voltage
Setting Dev. Bias
0 Normal –200
1 Darker –140
!
key to monitor the temperature
11-33
CÓPIA NÃO CONTROLADA
PROGRAM MODE
Settings
1 ~ 200
Default = 97
(0.02 V per step)
0 ~ 255
Default = 102
(0.04 V per step)
(0.02 V per
step) x Data
0: Normal
1: Darker
Note
Default
A245