Ricoh A219 Service Manual page 112

[C]
[A]
[B]
10. Reinstall the rear cover.
11. Plug the optics fiber cable [A] into the DF and the copier.
12. Plug the power supply cord [B] of the DF into the outlet in the copier rear
cover.
13. Attatch the voltage reference decal [C].
14. Check that the rubber pad [D] is in contact with the top of the operation
panel cover. If it is not, remove the DF grip [E] (2 screws), then adjust the
position of the magnet catch [F] so that the rubber pad is in contact with
the top of the operation panel cover.
15. Turn on the main switch and check the operation of the DF.
SM
CÓPIA NÃO CONTROLADA
A662I505.wmf
3-11
CÓPIA NÃO CONTROLADA
DOCUMENT FEEDER (A662)
[D]
[E]
[F]
A662I514.img
[F]
A662I515.img
A219