Default Codes & Telephone Numbers; Default All Programming To Factory Settings; Clear Alarm Memory Buffer; Initiate A Call To The Call Back Number - Assa Abloy S series Installation & Programming Manual

DEFAULT ALL PROGRAMMING TO FACTORY
SETTINGS
DEFAULT ALL PROGRAMMING TO FACTORY SETTINGS - P200E 10E
This location is used to return the panels User and Installer Codes plus the Telephone Numbers & Account Codes to the
default settings.

CLEAR ALARM MEMORY BUFFER

CLEAR ALARM MEMORY BUFFER - P200E 11E
This location is used to clear ALL of the events stored on memory.
INITIATE A CALL to the CALL-BACK NUMBER
INITIATE A CALL to the CALL-BACK NUMBER - P200E 12E
This location is used to force a call to the call-back number..

READ RSSI from PENDANTS and WIRELESS ZONES

READ RSSI from PENDANTS and ZONES - P200E 14E
This location is used to display the RSSI (received signal strength) from Pendants and Wireless Zones that are loaded into
the panel. The feature was added at panel version V906.5 and requires the Arrowhead RX-16 MF receiver to be
connected to the panel for RSSI data to be available. The RSSI reading will be shown along with the user or zone number
that was received. The feature can only be displayed on LCD keypads with a software version of V208.5 and higher or the
Icon LCD keypad
92