Dialler; Dialler Options 2 - Assa Abloy S series Installation & Programming Manual

TIMEZONE OPTIONS - P174E 1-8E
If option 1 is turned on for a Time-zone, that time-zone will not be disabled when a holiday occurs. Normally when a
holiday occurs all Time-zones will be disabled but if this option is turned on the Time-zone will not be affected when a
holiday is active.
DIALLER OPTIONS - P175E 1E
Option 1 - Dialler is Enabled
Option 2 - Fax Defeat
Option 3 - Disable Telephone Line Monitoring
Option 4 - Pulse Dialling (NOTE: For DTMF 4 & 5 must be OFF)
Option 5 - Reverse Pulse Dialling (NOTE: For DTMF 4 & 5 must be OFF)
Option 6 - Long DTMF Dialling Digits
Option 7 - Auto-detect Modem
Option 8 - Force V21 Mode
Option 1 Dialler is Enabled - If this option is turned off the dialler will be disabled. The option must be on to allow the
dialler to make calls.
Option 2 Fax Defeat - The panel can automatically answer an in-coming call in two ways. The first is to set the auto-
answer ring count to a convenient number (P175E4E) and let the phone ring until this number is reached at
which time the panel will answer the call. The second method is to use fax defeat which entails calling the
panel and letting it ring no more than 3 times, hanging up, then ringing back within 45 seconds. The panel
will now answer the call on the first ring. There is also a manual answer function described on page 36.
Option 3 Disable Telephone line Monitoring - If the panel is connected to a poor telephone line and the line failure
alarm is appearing regularly, by turning this option on the panel will not do the line test.
Option 4 Pulse Dial - If this option is Off the panel will dial in DTMF format, if On then the panel will dial using Pulse
Dialling format
Option 5 Reverse Pulse Dial - If this option is On, and option 4 is On, then the panel will dial using Reverse Pulse
Dialling format (eg the number 9 = 1 pulse). If this option is Off and Option 4 is On, the panel will dial in
normal Pulse format (eg the number 9 = 9 pulses).
Option 6 Long DTMF Dialling Digits - If this option is Off, the panel will dial using normal dialling (75ms on & 75ma
off). If it is On, the panel will dial using the long tones (100ms on & 100ms off).
Option 7 Auto-detect Modem - If this option is on the panel will answer an in-coming call with the V21 acknowledge
tone. If the modem does not respond within 5 seconds the panel will then generate the acknowledge tones
for BELL103 format. It will repeat this cycle twice and then hang-up if no communication with a modem is
established.
Option 8 Force V21 Mode - The dial up panel to PC link can be established using either Bell 103 or V21. If the auto-
detect function at option 7 does not result in the best format for your modem then you can force the panel
to only communicate in one format. If the LED is off the format is BELL103, LED on means V21.
DIALLER OPTIONS 2 - P175E 2E
Option 1 - Step to next Number
Option 2 - Upload/download uses Call-back Number
Option 3 - Upload/download only if Disarmed
Option 4 - Send Test Calls Only if Armed
Option 5 - Test Time Period is in days
Option 6 - Hold line open following Domestic/Voice report for DTMF control
Option 7 - First to Open Last to Close Reporting
Option 8 - Answer After 1 ring for Two Way Voice Call-back Mode
TIME ZONE OPTIONS
1 = Ignore Holidays
2-8 = Spare

DIALLER

78
DIALLER OPTIONS

DIALLER OPTIONS 2