Assa Abloy S series Installation & Programming Manual page 31

ing and holding the <CONTROL> button then within 2 seconds pressing the <ENTER> button you can access the
sub- text that describes what each option can do. To exit the sub-text display press <ENTER>.
STEPPING BACK THROUGH THE MENUS
If you are in a Menu location, eg the "USER" Data Entry field, and you wish to step back one stage to the previous Sub-
Menu, you need to press the <PROGRAM> button.
Each time the <PROGRAM> button is pressed the display will step back to the previous stage (remembering where you
were before) until you get back to the Main-Menu.
For example if you were in the "KEYPADS" Main-Menu, then pressed <ENTER> to get to the "AREAS" Sub-Menu for key-
pads, then pressed <ENTER> again to get to the "AREAS" Data Entry-Menu for keypads, you could now press the
<PROGRAM> button once and it would take you back to the "KEYPADS/AREAS" Sub-Menu. Pressing <PROGRAM> again
will take you back to the "KEYPADS" Main-Menu, and pressing <PROGRAM> one more time will return you back to the
default "USERS" Main-Menu.
If you get back to the "USERS" menu and press the <PROGRAM> button once more the display will go to the
program exit menu. If you press <ENTER> when at this point the panel will leave program mode. If you don't wish to
leave program mode you can press the <PROGRAM> button again to return to the "USERS" menu.
The flowchart below indicates the program menu steps using the "ARROW" , "ENTER" & "PROGRAM" Buttons on the key-
pad.
Button
PROGRAM
Leaves Sub-Menu and goes
back to Main-Menu
Button
PROGRAM
Leaves Data-Mode and goes
back to Sub-Menu
USER 100 CODE
— (Data)
LEARN RADIO USER 1
-ENTER- TO LEARN
Arrow
USER 1 CODE
123 (Data)
Arrow
Arrow
USER 1 ACCESS OPT
- - - - - - - -
USERS (Main-Menu Heading)
_
ENTER
To access Sub-Menu
USERS (Main-Menu Heading)
CODES
(Sub-Menu Heading)
ENTER
To access Data-Menu
(Data)
31
MAIN-MENU
or Arrows will Cycle
through Main-Menus
Button
SUB-MENU
or Arrows will Cycle
through Sub-Menus
Button
DATA ENTRY-MENU
Arrows can be used in the Data-
Menu fields. See below for details.
USER 2 CODE
— (Data)
Arrow
Pressing <CONTROL> then
<ENTER> will display the 8
Sub text options at this
location