Settings In Krds / Rd Mode - Konica Minolta bizhub C350 Service Manual

bizhub C350 Field Service Ver2.0 Sep. 2004
4.7

Settings in KRDS / RD Mode

• The remote diagnosis system displayed varies according to the setting made with "Secu-
rity Mode" → "Remote Diagnosis System Choice."
• Make the settings necessary when a Data Terminal is mounted.
☞ For details, see Service Manual for Data Terminal.
A. e-mail / Modem
Functions • Select the type of system used in the Remote Diagnosis System.
Use • Use when the system is newly installed or the existing one is changed.
Setting/Procedure • Select e-mail or Modem.
B. ID Code
Functions • To register the Tech. Rep. ID code.
Use • To register or change the Tech. Rep. ID code
Setting/Procedure • Enter a 7-digit code from the 10-Key Pad (0000001 to 9999999).
Registration
• Touch ID Code and enter the Tech. Rep. ID.
• Press the ID key to register the ID.
• The "Detail Setting" key will appear when the ID has been registered.
C. DT Setting
Functions • To make the DT setting and perform the initial transmission.
Use • Use to change the details of setting.
• Use to register the machine with the Center.
Setting/Procedure 1. Call the Tech. Rep. Mode to the screen.
2. Touch "KRDS" or "RD Mode."
3. Touch "Detail Setting" to access DT Setting.
DT Setting
• Set "Password," "DT-ID," and "TEL No."
• When "e-mail" is selected for the ID Setting, TEL No. is the e-mail address.
Initial Transmission
• Press the Initial Transmission key to execute the initial transmission to the Cen-
KRDS : e-mail
RD Mode :e-mail, Modem
e-mail Modem
ter and the machine equipped with the Data Terminal is registered with the Cen-
ter (only if "Modem" is selected for "System Selection").
TECH. REP. MODE
3-67