Settings In The Store; Reset Mode; Mode Store; Counter List - Konica Minolta bizhub C350 Service Manual

Utility Mode
3.3

Settings in the store

3.3.1

Reset Mode

Functions • To register the copy mode functions or scanner mode functions
✽ The copier is initialized at the following timings:
• The Power Switch is turned ON.
• Panel is reset.
• An Interrupt mode is canceled.
• Auto panel reset
• The access # entry screen for Volume Track is changed
• Application is changed
Use • To match the copying functions set up upon resetting to user's need.
Setting/Procedure "Current Mode"
• The copy mode or scanner mode functions set arbitrarily on the panel are regis-
"Factory Default"
• The factory-set copy mode or scanner mode functions are registered.
3.3.2

Mode Store

Functions • To register the copy mode functions being currently set as a job program or
Use • To save the copying settings the user wants
• To make copies using previously stored settings by calling up a job program pre-
Setting/Procedure • Up to ten different job programs can be registered.
• "Copy Program Recall" as a Utility function is used to call up a program.
3.4

Counter List

Functions • To check the count of each counter or print a list of counters.
Use • To check the total number of copies made and the number of printed pages pro-
Setting/Procedure • To print the list, load Tray1 with A4 lengthwise or Letter lengthwise paper.
• The machine rejects the print cycle if Tray1 is loaded with paper of any other
3.5

Controller Detail

Functions • To set the external controller
• This function is not available if there is no external controller connected to the
Use • To change the setting of the external controller
Setting/Procedure • For details, see the manual for the external controller (option).
3-8
tered.
check or delete a job program that has previously been registered.
viously stored
duced in color and B/W, thereby identifying machine usage
size.
machine.
bizhub C350 Field Service Ver2.0 Sep. 2004