Tech. Rep. / Test Mode; Tech. Rep. Mode Setting Procedure; Type Of The Tech. Rep. Mode - Konica Minolta bizhub C350 Service Manual

Tech. Rep. / Test Mode

2. Tech. Rep. / Test Mode
• The Tech. Rep. / Test Modes are set from the Tech. Rep. Mode screen of the main unit.
2.1

Tech. Rep. Mode setting procedure

1. Press the "Utility" key.
2. Touch the "Counter List" Check key.
3. Press the keys, "STOP" --> "0" --> "0" --> "STOP" --> "0" --> "1", in this order.
4. Enter the service code (8 digits).
5. Select "ADF Check".
NOTE
• Do not teach this procedure to others unless it is absolutely necessary.
1
2.2

Type of the Tech. Rep. Mode

• The ADF Check in the Tech. Rep. Mode has 7 items as follows.
• Original Stop Position (Adjust)
• Auto Adjust Stop Position (Adjust)
• I/O Check (Test)
• Sensor Auto Adjust (Adjust)
3-2
DF-601 Field Service Ver2.0 Sep. 2004
• Registration Loop (Adjust)
• Paper Passage (Test)
• Tray Width Adjust (Adjust)
4582fs3527e1