Konica Minolta bizhub C350 Service Manual page 145

Utility Mode
Transferring to Power Save when job is in Held/Locked Jobs queue
Functions • To select whether to transfer to Sleep when a job is set in Held/Locked Job
Use • Use to cancel Sleep for a held or locked job
Setting/Procedure • The default setting is Permit.
C. Account Change Auto Reset
Functions • To select whether to reset the copying mode functions to the default ones when
Use • To select not to reset to the default settings even when the accounts are
Setting/Procedure The default setting is Yes.
3.7 User's Choice: 2
3.7.1 1/3
A. Language Select
Functions • To select the language of the LCD display messages.
• The counter outputs will be produced in the language selected.
Use • To change the language displayed on the control panel to the desired one
Setting/Procedure • The language options depend on the marketing area selected in "Marketing
B. 2in1, 4in1, Booklet Copy Zoom
Functions • To select, when 2in1, 4in1, or Booklet is selected, whether or not to automati-
Use • To allow the user to set the zoom ratio him/herself when 2in1, 4in1, or Booklet is
Setting/Procedure • The default setting is Preset (call up).
C. ACS Judgement Level Adjustment
Functions • To set the criterion level to discriminate between a colored original and a black-
Use • To change the criterion level, with which an image containing partly colored
Setting/Procedure • Five levels are available to choose from and the default setting is 3.
3-10
queue
Permit Prohibit
the Key Counter is unplugged, a magnetic card is pulled out, or the access # is
entered for Volume Track.
changed through the use of a data management device
Yes No
Area" available from "System Input" under Tech. Rep. Mode.
cally call up the zoom ratio optimum for the mode.
selected
Preset No Preset
and-white original in the Auto Color (ACS) mode.
areas is taken as a black-and-white original
Near Black 1 2 3 4 5 Near Full Color
bizhub C350 Field Service Ver2.0 Sep. 2004