Settings In Each User Mode Function - Konica Minolta MS6000 MKII User Manual

Settings in Each User Mode Function

U1: Special Print Mode
This function is not available.
U2: Engineering Enhancement Mode
Slight image distortion occurring in the scan direction can be corrected with this function.
Select U2 in the User mode.
1
Press the Exposure Mode key to display d*.
2
Press the Exposure Adjustment key (Darker or Lighter) to select the desired setting
3
value.
Press the Start key to validate the setting value.
4
NOTE NOTE
This setting returns to the default value when the Power Switch is turned OFF.
You can register the setting value using with the Job Program.
Code Setting Value
d0 0mm
d1 0.5mm
d2 1.0mm
d3 1.5mm
d4 2.0mm
d5 2.5mm
d6 3.0mm
d7 3.5mm
d8 4.0mm
Before Correction
Initial Setting
*
2. Initial Settings
After Correction
☞
See p. 2-36.
4-7