bizhub C350 Field Service Ver2.0 Sep. 2004
3.8
Copy program Recall
Functions
• To call up a program registered through Job Memory Input.
Use
• To call up a job program that the user has previously programmed and regis-
Setting/Procedure • Select the program number.
• If the machine is not equipped with capabilities (e.g., stapling) that were pro-
3.9
Printer Setting
3.9.1
Default setting
A. Basic
(1) Default Tray
Functions
• To set the default Tray used by the printer
Use
• To change the default value of Tray for the printer
Setting/Procedure • The default setting is Auto Paper Select.
✽ Displayed options are only the paper sources connected to the machine.
(2) Paper Size
Functions
• To set the default paper size used by the printer
Use
• To change the default value of paper size for the printer
Setting/Procedure ✽ Default setting depend on the marketing area setting.
Metric Area : A4
(3) Output
Functions
• To set the default values of printing method and number of copy sets for the
Use
• To change the default values of printing method and number of copy sets for the
Setting/Procedure Printing Method
• The default setting is Simplex.
Binding Method
• Displayed when Duplex is selected
• The default setting is left-edge binding.
No. of Sets
• The default setting is 1.
tered
vided when the program was registered, calling up that particular program is dis-
abled.
Inch Area : Letter
printer
printer
Simplex
Duplex
(left-edge binding)
1
(1 to 999)
(top-edge binding)
Utility Mode
3-13