Cleaning Of The Area Around The Waste Toner Collecting Port; Replacing Ozone Filter; Cleaning Of The Comb Electrode - Konica Minolta bizhub C350 Service Manual

Periodical check
1.5.17

Cleaning of the Area around the Waste Toner Collecting Port

1.5.18

Replacing Ozone Filter

1.5.19

Cleaning of the Comb Electrode

2-20
bizhub C350 Field Service Ver2.0 Sep. 2004
1. Open the Rear Left Cover.
2. Remove the Waste Toner Bottle [1].
[1]
4036fs2045c1
3. Wipe the areas around the Waste
4036fs2509c0
1. Holding onto the hook, remove the
[1]
2. Remove the Paper Dust Remover.
☞ 2-15
3. Select "Tech. Rep. Mode"
4036fs2510c0
1. Open the Front Door.
2. Clean the Comb Electrode by mov-
NOTE
• Move the Comb Electrode Cleaning
[1]
4036fs2511c0
Toner Collecting Port clean of spilled
toner and dirt using a soft cloth
dampened with water or alcohol.
Ozone Filter [1].
→
"Counter" "Life" and clear the
count of "Paper Powder Filter/Ozone
Filter."
ing the Comb Electrode Cleaning
Lever [1] In and Out several times.
Lever slowly forward and backward
until it stops.
→