Konica Minolta bizhub C350 Service Manual page 241

Mechanical adjustment
4. After the Bypass Paper Size Unit base has been mounted, check that the lever of the
Bypass Paper Size Unit moves smoothly in a manner operatively connected to the
Bypass Guide.
5. Call the Tech. Rep. Mode to the screen and select "Machine Adjust" → "Bypass Guide
Adjust." Then, carry out "Bypass Guide Adjust."
☞
2-61
3-106
[1]
[3]
[2]
4036fs3051c0
4036fs3052c0
bizhub C350 Field Service Ver2.0 Sep. 2004
2. Install the Bypass Unit Cover so that
part A (edge) [2] of the Rack Gear [1]
for the Bypass Paper Size Unit and
part B [3] of the Bypass Unit Cover
are aligned in a straight line.
3. When the Bypass Paper Size Unit
base is mounted, align the lever
position of the Bypass Paper Size
Unit with the tab at the center in a
straight line.