None Key - Aastra 6731i User Manual

Line Keys and Programmable Keys
IP Phone UI
Note:
1.Recipient of a Paging call can set a global "Do Not Disturb" (DND) to ignore any incoming pages.
2.For incoming Paging, the phone uses the Intercom configuration settings. The incoming Page is dependant on the
"Allow Barge-In" parameter setting and the "Idling/On Call" state.
1. On the IP Phone, press the key you configured for Paging.
The phone opens a multicast RTP session and an outgoing OR incoming phone screen displays as follows:
2. Press the Drop key to end the multicast RTP session and return to the idle screen.
Note:
If you enable global DND on the phone, the incoming multicast RTP session is dropped.

None Key

You can set a key to force a blank entry on the IP phone display for a specific key. You do this by setting the key to "none".
If a particular key is not defined, it is ignored.
Setting a None Key
Aastra Web UI
Note:
Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY by your System Administrator.
Use the following procedure to configure a None key on the 6731i IP Phone:
82
Paging 00:01
= Drop
41-001387-00 Rev 00 – 01.2011