Aastra 6731i User Manual page 144

Additional Features
Intercom Behavior
If "
Incoming Call Interrupts Dialing
ting takes precedence over an enabled "Allow Barge In" setting. The incoming call interrupts your dialing on an outgoing
intercom call. On an incoming intercom call, the enabled "Allow Barge In" and "Auto-Answer" occurs while you are dial-
ing to transfer or conference the call. However, the incoming call goes to an available idle line, and the LED blinks while
you are dialing the second half of the conference or transfer.
If "
Incoming Call Interrupts Dialing
that line. The phone answers the call under all conditions.
Configuring "Incoming Call Interrupts Dialing"
Aastra Web UI
Use the following procedures to configure "Incoming Call Interrupts Dialing" on the IP Phone:
Note:
"Incoming Call Interrupts Dialing" is disabled by default.
1. Click on Basic Settings->Preferences->General.
2. Enable the "Incoming Call Interrupts Dialing" field by checking the check box. Disable this field by unchecking the
box). Default is disabled.
3. Click Save Settings.
138
" is enabled and you are dialing an outgoing Intercom call, the enabled interrupt set-
" is disabled, an incoming intercom goes to an available idle line and the LED blinks for
41-001387-00 Rev 00 – 01.2011