Line Key - Aastra 6731i User Manual

User guide release 3.2
Hide thumbs Also See for 6731i:
Table of Contents

Advertisement

Key Function
Description
BLF/Xfer
Indicates the key is configured as a simplified BLF key and a transfer key. You can use this key to perform the
BLF function, or you can use it as a transfer key to transfer calls.
Speed Dial/Xfer
Indicates the key is configured as a simplified speed dial key and a transfer key. You can use this key to perform
speed dial functions, or you can use it as a transfer key to transfer calls.
Speed Dial/Conf
Indicates the key is configured as a speed dial key and a conference key. You can use this key to speed dial from
within a conference call, and add the new call directly to the conference.
Directory
Indicates the key is configured to access the Directory List.
(Key 7 by Default)
Intercom
Indicates the key is configured to be used for intercom calls.
Services
Indicates the key is set to access Services, such as, Directory List, Callers List, Voicemail, or any other XML appli-
cations set up by your System Administrator.
(Key 8 by Default)
Phone Lock
Indicates the key is configured as a phone lock key, allowing you to press this key to lock/unlock the phone.
Paging
Indicates the key is configured as a Paging key. When pressed, the phone can send Real Time Transport Proto-
col (RTP) streams from a preconfigured multicast address without involving SIP signaling. You can also receive
RTP streams from preconfigured multicast addresses (can specify up to 5 addresses) using the "Paging Listen
Addresses" at the path,
Basic Settings->Preferences->Group Paging RTP Settings in the Aastra Web UI. For more information about set-
ting this parameter, see
Programmable keys can also be set up to quickly to access features such as Call Return (*69) or Voicemail.
Note:
Quick access features like Call Return and Voicemail must first be configured on your PBX in order to work on your
phone. See your System Administrator for more information.
The following paragraphs describe how to configure each function listed in the previous table.

Line Key

You can set a programmable key to act as a line/call appearance key on the 6731i. The key acts as a line that behaves the
same as a hard line key (L1 and L2). For more information about the behavior of line keys, see
Appearance Keys"
on
page 43.
You use the Aastra Web UI to set a Line key.
Configuring a Line Key
Aastra Web UI
Note:
Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY by your System Administrator.
Use the following procedure to set a Line key on your phone:
41-001387-00 Rev 00 – 01.2011
"Group RTP Paging (receives RTP streams)"
Line Keys and Programmable Keys
on
page
145.
"Multiple Line and Call
45

Advertisement

Table of Contents
loading

Table of Contents