Configuring Message Waiting Indicator
Aastra Web UI
Use the following procedure to configure the message waiting indicator on a specific line or on all lines on the IP phone:
Note:
"Message Waiting Indicator Line" parameter is set to ALL lines by default.
1.
Click on Basic Settings->Preferences->General.
2.
The "Message Waiting Indicator Line" field is set to ALL lines by default. If required, change the setting to a specific
line by selecting a line from the list. Valid values are All and lines 1 through 6.
3.
Click Save Settings.
Incoming Intercom Call Features
Incoming Intercom
By default, the IP phone allows incoming intercom calls to be automatically answered without having to set up an Icom
key on your phone. The phone automatically plays a warning tone when it receives an incoming intercom call. It also
mutes the microphone. If the intercom call comes into the phone while an active call is already present, the phone puts
the active call on hold and answers the intercom call.
41-001387-00 Rev 00 – 01.2011
Additional Features
143