Aastra 6731i User Manual page 99

Using Local Conferencing
IP Phone UI
Use the following procedure to create a conference call using local conferencing. Use the following illustration as a refer-
ence:
1. When you begin a conference, you are the first party in the conference (Party 1). Pickup the handset or press the
speakerphone key.
A line opens up.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to the conference.
4. Press the Conf Key . A new line opens.
5. Enter the phone number of Party 3.
6. Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding them to the conference.
7. Press the Conf key again to add Party 3 to the conference. Party 1 (which is yourself ), Party 2, and Party 3
are all connected to a single conference.
8. To drop a party from the conference, press the Conf key
Note:
You can use 2 and 5 to scroll through and see the numbers and names (if available) of the parties in the conference call.
When a name is displayed, pressing 4 drops the displayed party from the call.
41-001387-00 Rev 00 – 01.2011
2
=Dial
once more.
Conference
Key
Handling Calls
93