Stuttered Dial Tone - Aastra 6731i User Manual

Additional Features
1. Click on Basic Settings->Preferences->General.
2. In the "Call Waiting Tone Period" field, enter a time period, in seconds, that the call waiting tone will be audible
on an active call when another call comes in. Default is 0 seconds.
When enabled, the call waiting tone plays at regular intervals for the amount of time set for this param-
eter. For example, if set to "30" the call waiting tone plays every 30 seconds. When set to "0", the call
waiting tone is audible only once on the active call.
3. Click Save Settings.

Stuttered Dial Tone

You can enable or disable the playing of a stuttered dial tone when there is a message waiting on the IP phone.
You can configure this feature using the Aastra Web UI.
Configuring Stuttered Dial Tone
Aastra Web UI
Use the following procedures to configure stuttered dial tone on the IP phone:
Note:
"Stuttered Dial Tone" is enabled by default.
132
41-001387-00 Rev 00 – 01.2011