Aastra 6731i User Manual page 152

Additional Features
Configuring Group RTP Paging
Aastra Web UI
Use the following procedure to configure RTP streaming on the receiving end for Paging applications using the Aastra
Web UI:
1. Click on Basic Settings->Preferences->Group Paging RTP Settings.
2. In the "Paging Listen Addresses" text box, enter the multicast IP address(es) and port number on which the phone
listens for incoming multicast RTP packets.
Enter the IP address in dotted decimal format.
(for example, 239.0.1.15:10000,239.0.1.20:15000)
You can enter up to 5 listening multicast addresses.
If this field is blank, the Paging Listening capability is disabled on the phone.
Note:
1. Recipient of a Paging call can set a global "Do Not Disturb" (DND) to ignore any incoming pages.
2. For incoming Paging, the phone uses the Intercom configuration settings. The incoming Page is dependant on
the "Allow Barge-In" parameter setting and the "Idling/On Call" state.
3. Click Save Settings.
146
41-001387-00 Rev 00 – 01.2011