Aastra 6731i User Manual page 164

1. Press on the phone to enter the Options List.
2. Select User Password and press Enter.
3. Enter the current user password and press Enter.
4. Enter the new user password and press Enter.
5. Re-enter the new user password and press Enter.
A message, "Password Changed" displays on the screen.
Aastra Web UI
1. Click on Operation->User Password.
2. In the "Current Password" field, enter the current user password.
Note:
By default, the user name is "user" (all lowercase) and the password field is left blank. If you have forgotten your pass-
word, contact your System Administrator for assistance.
3. In the "New Password" field, enter the new user password.
4. In the "Password Confirm" field, enter the new user password again.
5. Click Save Settings.
For information on how to access the Aastra Web UI, go to the section
Why does my phone display "Bad Encrypted Config"?
The IP phone displays "Bad Encrypted Config" because encrypted configuration files are enabled but the decryption proc-
ess has failed.
Report this error to your System Administrator.
How do I restart the IP phone?
IP Phone UI
41-001387-00 Rev 00 – 01.2011
Troubleshooting Solutions
"Using the Aastra Web UI" on page 13.
158