Aastra 6731i User Manual page 100

Handling Calls
Joining Two Active Calls in a Single Conference
IP Phone UI
1. Begin with active calls on two different lines (for example, Line 1 and Line 2 have active calls).
2. Press the Line key for which you want to conference the two calls together (for example, Line 1).
3. Press the Conf key .
4. Press the Line key that has the second active call (for example, Line 2).
5. Press the Conf key . The two active calls link into a conference call on Line 1.
Note:
You can use 2 and 5 to scroll through and see the numbers and names (if available) of the parties in the conference call.
When a name is displayed, pressing 4 drops the displayed party from the call.
Centralized Conferencing (for Sylantro and Broadsoft Servers)
The 6731i allows you to create multiple conferences with unlimited participants (depending on your server limitations)
when your Administrator enables Centralized Conferencing.
If your Administrator does not enable Centralized Conferencing, then the 6731i uses Local Conferencing by default.
Your Administrator can configure Centralized Conferencing globally on all lines or on specific lines. Although, for the glo-
bal setting to work, you must configure the lines with the applicable phone number.
Reference
For more information on Centralized Conferencing, see
Administrator.
Using Centralized Conferencing
IP Phone UI
Note:
When Centralized Conferencing is enabled on your phone, local conferencing (or three-way conferencing) works as
indicated in the previous section,
works as indicated in the previous section,
94
"Centralized Conferencing"
<blue>"Using Local Conferencing. "
<blue>"Joining Two Active Calls in a Single Conference. "
on page 150 or contact your System
Joining two active calls in a conference also
41-001387-00 Rev 00 – 01.2011