Blf List Key - Aastra 6731i User Manual

5. In the "Line" field, select a line for which to apply to this key. Valid values are Global (for all lines), or 1 through 6.
6. Click Save Settings.

BLF List Key

(For use with the BroadSoft Broadworks Rel 13 or higher platform only)
The BLF\List feature on the IP phones is specifically designed to support the BroadSoft Broadworks Rel 13 Busy Lamp Field
feature.
This feature allows the IP phone to subscribe to a list of monitored users defined through the BroadWorks web portal.
Note:
Your System Administrator must have BLF List enabled on the BroadWorks Server. Contact your System Administrator for
more information.
In addition to monitoring the idle and busy state, the BLF\List feature also supports the ringing state. On the 6731i phone,
the LED lights next to each BLF key illuminate steady to indicate the monitored line is off-hook or unregistered. The LED
goes off when the is idle. When the monitored extension is ringing, the LED flashes.
Note:
You can use a BLF\List configured key to dial out.
For Example:
A receptionist has a 6731i running Broadsoft firmware that subscribes to a list of extensions from the BroadWorks Applica-
tion Server. On the 6731i running Broadsoft firmware, the key LEDs illuminate either flashing, solid, or turn off depending
on the state of those extensions.
Note:
The Broadworks BLF feature is not the same as the Broadworks Shared Call Appearance (SCA) feature and does not per-
mit call control over the monitored extension.
Configuring a BLF List Key
Aastra Web UI
The BLF List function can be configured on the 6731i using the Aastra Web UI only.
If you set a key to use BLF/List, you must also enter a BLF List URI at Operation->Programmable Keys->Services. The
BLF List URI is the name of the BLF list defined on the BroadSoft BroadWorks Busy Lamp field page for your particular user.
For example, my480i-blf-list@as.broadworks.com. The value of the BLF\List URI parameter must match the list name con-
figured. Otherwise, no values display on the 6731i screen and the feature is disabled.
Note:
Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY by your System Administrator.
41-001387-00 Rev 00 – 01.2011
Line Keys and Programmable Keys
57