Park/Pickup Keys - Aastra 6731i User Manual

Line Keys and Programmable Keys

Park/Pickup Keys

The 6731i phone has a park and pickup call feature that allows you to park a call and pickup a call when required. The IP
phones support the Park/Pickup feature on the Asterisk, BroadWorks, and Sylantro servers.
The park/pickup feature performs as follows:
• When a call comes in and you pickup the handset, you can press the applicable "Park" key to park the call.
• After the call is parked, you can press the "Pickup" key, followed by the applicable value to pickup the call.
Administrators can configure the park and pickup keys for any line using the configuration files or the Aastra Web UI.
Users can make changes to customize the label of the park/pick up keys using the Web UI.
Configuring Park/Pickup Keys
Aastra Web UI
Note:
Keys 5 and 6 (SAVE and DELETE keys) can be made configurable ONLY by your System Administrator.
Use the following procedure to configure park/pickup on the 6731i phone
1. Click on Operation->Programmable Keys.
2. Select from "Key 1" through "Key 8". (Keys 5 and 6 can be madeconfigurable only by your system administrator.)
3. In the "Type" field, select Park.
Note:
The" Value" and "Line" fields are configured by the Administrator.
4. Select from "Key 1" through "Key 8".
5. In the "Type" field, select Pickup.
6. Click Save Settings.
7. Click on Reset, then click Restart to restart the IP phone and apply the changes.
Using the Park Call/Pickup Parked Call Feature
Use the following procedure on the IP phone to park a call and pick up a parked call.
68
41-001387-00 Rev 00 – 01.2011