Switch Ui Focus To Ringing Line; Preferred Line And Preferred Line; Timeout - Aastra 6731i User Manual

Switch UI Focus to Ringing Line

You can configure a feature on the 6731i that controls the behavior of the phone when it receives an incoming call when
it is already in a connected call. When a call comes into the phone, and the phone is already on a connected call, the
phone switches focus to the ringing line to enable the user to see who is calling them. You can turn off this functionality
so that the phone stays focused on the connected call. You can do this using the Switch Focus to Ringing Line parameter
in the Aastra Web UI.
Configuring "Switch Focus to Ringing Line" Using the Aastra Web UI
Aastra Web UI
Use the following procedure to enable or disable the "Switch Focus to Ringing Line" using the Aastra Web UI:
1. Click on Basic Settings->Preferences->General.
2. The "Switch Focus to Ringing Line" field is enabled by default. To disable this field, uncheck the box.
3. Click Save Settings.
Preferred Line and Preferred Line Timeout
The 6731i has a feature called "preferred line" and "preferred line timeout". If you enable the preferred line parameter on
your phone, after a call ends (incoming or outgoing), the display switches back to the preferred line. Next time you go
off-hook to make another call, you pickup on the preferred line. You can enable the preferred line parameter using the
Aastra Web UI at the location, Basic Settings->Preferences->General. You can also set a preferred timeout parameter
that specifies the number of seconds it takes for the phone to switch back to the preferred line.
Note:
You can configure "Preferred Line" and "Preferred Line Timeout" using the Aastra Web UI only.
139
41-001387-00 Rev 00 – 01.2011