Switch Ui Focus To Ringing Line - Aastra 6735i User Manual

Switch UI Focus to Ringing Line

You can configure a feature on the 6735i that controls the behavior of the phone when it receives an incoming call when it
is already in a connected call. When a call comes into the phone, and the phone is already on a connected call, the phone
switches focus to the ringing line to enable the user to see who is calling them. You can turn off this functionality so that
the phone stays focused on the connected call. You can do this using the Switch Focus to Ringing Line parameter in the
Aastra Web UI.
Configuring "Switch Focus to Ringing Line" Using the Aastra Web UI
Aastra Web UI
Use the following procedure to enable or disable the "Switch Focus to Ringing Line" using the Aastra Web UI.
Note:
"Switch Focus to Ringing Line" is enabled by default.
1. Click on Basic Settings->Preferences->General.
2. The "Switch Focus to Ringing Line" field is enabled by default. To disable this field, uncheck the box.
3. Click Save Settings to save your settings.
41-001451-00 REV00 – 07.2011
Additional Features
176