OPTIONAL ACCESSORIES
This section contains details of the optional accessories available for the DR308e printer:
•
8.1 Cutter
•
8.2 Stacker
•
8.3 Dispenser
•
8.4 External Rewinding Unit
•
8.5 Keypad
•
8.6 Calendar IC
8.1 CUTTER
Cutter should only be installed by Sato qualified servicing personnel.
8.1.1 To route the media when the cutter is installed
1.
Load the media accordingly to the instructions as men-
tioned in Section 2.3 Loading Labels or Tags on page
2-3.
2.
With the head lock lever release, set the tip of the
media on the platen roller.
3.
Remount the print head by turning the head lock lever
clockwise until it latch on. The print head should lock into
place firmly. Close the main cover.
4.
Power on the printer and press the LINE button to set
the printer to OFFLINE mode.
5.
Press the FEED button. An empty media should be fed
and cut out. This procedure is to ensure the media is
loaded correctly.
Note:
If the media is fed without cutting, make sure the PRINT
MODE of the ADVANVCE MODE is set to CUTTER.
Refer to Section 3.8.3 Choosing Print mode Option
on page 3-17.
DR308e Operator's Manual
Section 8: Optional Accessories
Platen roller
Page 8-1