SATO DR308e Operator's Manual page 38

Section 3: Operation and Configuration
3.7 INTERFACE MODE (cont'd)
3.7.2 Enabling optional connected Keypad
1.
When KEYPAD PORT is displayed, press FEED button to enter to the
setting mode for enabling the keypad port.
2.
Press LINE button to selected ON, if the optional keypad is connected,
or OFF, if the keypad is not connected.
Refer to Section 2.7.2 Connecting the optional keypad on page 2-10
for the connection of the optional keypad. Refer to the operator manual of
the keypad for details on operation.
3.7.3 Setting of printing codes to be ignore
When IGNORE is displayed, press FEED button to enter to the setting
mode.
Handling CR/LF codes
This setting determines whether Carriage Return and Line Feed codes
are processed or ignored.
Select YES to ignore the codes, and NO to process them. However, some
specific graphic data that is in Hex is not deleted.
1.
Press LINE button to toggle the selection, YES or NO.
2.
Press FEED to enter the setting.
If the communication protocol option is set to STATUS4, CAN/DLE set-
ting option is displayed, otherwise, it is return to OFFLINE mode.
Handling CAN/DLE
This setting determines whether the CANCEL and DATA LINK ESCAPE
codes are processed or ignored. It only appears when the communication
protocol option is set to STATUS4.
Select YES to ignore the codes, and NO to process them.
1.
Press LINE button to toggle the selection, YES or NO.
2.
Press FEED to enter the setting. The printer returns to OFFLINE
mode.
Page 3-14 DR308e Operator's Manual