SATO DR308e Operator's Manual page 44

Section 3: Operation and Configuration
3.8 ADVANCE MODE (cont'd)
3.8.11 Selecting the Type of External Signal Output
If the External Signal Output option is set to ENABLE, you will be brought
to this display to select the type of PREND output signal.
1.
Press the LINE button to select T1, T2, T3 or T4. The default value is
T4. For more details, refer to the Programming Guide from the Sato
certified servicing personnel.
2.
Press the FEED button to confirm your selection and proceed to the
next setting.
3.8.12 Selecting Reprint via External Signal Output
If the External Signal Output option is enabled, you will be brought to this
screen to choose whether the Reprint function can be activated via the
external signal port.
1.
When EXTERNAL REPRINT is displayed, press FEED button to enter
to the setting mode.
2.
Press the LINE button to select ENABLE or DISABLE.
The default setting is DISABLE.
3.
Press the FEED button to confirm your selection and proceed to the
next setting.
3.8.13 Setting the Calendar
This option is displayed only when the Calendar IC is installed to the
printer. This menu lets you set the desired date and time.
1.
When SET CALENDAR is displayed, press FEED button to enter to
the setting mode.
2.
Set the Year/Month/Date on the first line of display and then set the
time in 24 hour format on the second line of the display. The underline
indicates the digit is active for adjustment.
3.
Press LINE button to change the setting and then press FEED button
to shift to the next digit for setting.
4.
When the FEED button is pressed after setting the minute, the input
display is shown again with a "2" digit on the bottom right. Input the
same setting as the first time for a confirmation. The date and time will
be save and CALENDAR CHECK option is displayed.
Note:
If different date or time is entered from step 2, the printer will reset and
return to step 2 for re-entering.
5.
Press the FEED button to enter the setting for CALENDAR CHECK.
This menu allows you to ENABLE or DISABLE the Calendar Check
function.
6.
Choose the appropriate option with LINE button and press FEED
button to leave the Calendar settings and proceed to the next setting
option.
Page 3-20 DR308e Operator's Manual