SATO DR308e Operator's Manual page 3

Please read the following information carefully before installing and using the printer.
Warning symbol
The
Whenever the triangular Warning symbol appears in this manual, pay special attention to the warning(s) cited
below it. Failure to abide by the warnings may create the danger of death or serious personal injury.
Caution symbol
The
Whenever the triangular Caution symbol appears in this manual, pay special attention to the warning(s) cited
below it. Failure to abide by the warnings may result in injury or damage to property.
On Power Supply
• Do not use any other voltage except
the specified power voltage for the
printer that matches your domestic
power supply. Otherwise, it may
cause fires or electric shocks.
• Do not damage, break, or process the power
cable. Avoid placing heavy objects on, heating or
pulling the power cable. This may damage the
power cable and cause fires or electric shocks.
• When the power cable is damaged (cable conduc-
tors are exposed or cut, etc.), contact a sales out-
let, dealer, or service center. In this case,
continued use of the printer may cause fires or
electric shocks.
• Do not process, forcibly bend, twist, or pull the
power cable. Continued use of such a cable may
cause fires or electric shocks.
On Installation
• Place the printer on a solid, stable,
horizontal surface that is not sub-
ject to strong vibrations from adja-
cent mechanical devices. This
may cause malfunction and
shorten the life span of the printer.
• Avoid shaky or slanting tables, or
platforms that are liable to col-
lapse under a heavy weight. If the
printer is dropped or damaged,
immediately turn off the power,
pull out the power plug and con-
tact a service center. In this case, continued use of
the printer may cause a fire or electric shocks.
DR308e Operator's Manual
Safety Precautions
• If the printer emits any smoke or peculiar odors at
• Do not operate the power switch or handle the
• To reduce electrical risks, be sure
• Avoid installing the printer in direct
• Avoid placing the printer near large high-current
any time, stop using the printer immediately. Turn
off the power immediately, disconnect the power
cable from the power outlet, and contact a sales
outlet, dealer, or service center.
power cable with a wet hand. Otherwise, it may
cause electric shocks.
to connect the printer to ground
before use. Also, try not to share
the printer's AC outlet with other
electrical equipment, especially
those that draw high amounts of
current or cause electrical interference.
sunlight, or in dusty, very hot or
slippery areas. Also avoid place-
ment in damp, unventilated or
humid areas. If condensation
forms, immediately turn off the
power, and do not use the printer until the conden-
sation disappears. Otherwise the moisture may
cause electric shocks.
equipment, as such equipment can cause spikes
or under-voltages in the power supply.
Safety Precautions
Ground
Page i