SATO DR308e Operator's Manual page 34

Section 3: Operation and Configuration
3.6 USER MODE (cont'd)
3.6.5 Setting Zero Slash Changeover
You can use this setting to determine whether zeroes are printed with a
slash across them or not. The zero slash (excluding Kanji) can be set to
either "0" or "Ø".
1.
When ZERO SLASH is displayed, press FEED button to enter to Zero
Slash setting mode.
2.
Press LINE button to toggle between ON and OFF.
When ON is selected, the printer internal fonts will have a slash across
the center of the zero character. OFF means otherwise. The default
value is ON.
3.
Press FEED button to enter your setting and proceed to the next
setting option.
3.6.6 Setting JIS Kanji Code Changeover
The printer can be set to use either JIS code or Shift JIS code.
1.
When JIS CODE is displayed, press FEED button to enter to JIS code
setting mode.
2.
Press LINE button to toggle between JIS and SJIS. The default value
is JIS code.
3.
Press FEED button to enter your setting and proceed to the next
setting option.
Note:
This option is only valid for printing in Japanese.
3.6.7 Setting Character Pitch
This setting determines whether the space surrounding each text
character is of a fixed width, or whether that space is to be varied to be
visually more pleasant and proportional.
1.
When CHARACTER PITCH is displayed, press FEED button to enter
to Character Pitch setting mode.
2.
Press LINE button to toggle between PROPORT and FIXED. The
default value is PROPORT which is proportional.
3.
Press FEED button to enter your setting and return to the OFFLINE
Mode.
Page 3-10 DR308e Operator's Manual