Optional Accessories - SATO CL408 Operator And Technical Reference Manual

OPTIONAL ACCESSORIES

ACCESSORY
MEMORY EXPANSION
CALENDAR
LABEL CUTTER
LABEL DISPENSER
LABEL REWINDER
PARALLEL INTERFACE
SERIAL INTERFACE
COAX/TWINAX INTERFACE
All specifications subject to change without notice.
SATO CL Series Printers
CL408 CL412
Two slots for PCMCIA Memory Cards (up to 2MB each). Can be used
for Graphic File storage, print buffer expansion, format storage and
downloaded TrueType fonts.
An internally mounted Date/Time clock that can be used to date/time
stamp labels at the time of printing.
Internal attachment allowing labels to be cut at specified intervals.
Controlled through programming.
Internal attachment allowing
labels to be peeled from backing
for immediate (on demand)
application. Internal backing
take-up.
External option rewinds labels onto a roll after they are printed.
Parallel I/F card must be installed.
Serial I/F card must be installed.
Coax/Triax I/F card must be
installed in the interface slot.
Coax I/F emulates an IBM
3287-2 printer with a standard
Type A BNC connector. Twinax
I/F emulates IBM 5224, 5225,
5226 or 4214 printers with
auto-terminate/cable-thru
capabilities.
9001035 Rev. E
Section 1. Printer Overview
CL608 CL612
Internal attachment allowing
labels to be peeled from backing
for immediate (on demand)
application. Backing take-up
mounted externally to rear of
printer.
Coax/Twinax adapter card must
be installed. Coax I/F emulates
an IBM 3287-2 printer with a
standard Type A BNC connector.
Twinax I/F emulates IBM 5224,
5225, 5226 or 4214 printers with
auto-terminate/cable-thru
capabilities. Allows the
Centronics interface to remain
operational.
Page 1-7