32.Install:
• Protector guide "1"
1
INSTALLING THE FRONT FORK LEGS
EASB296176
1. Install:
• Front fork "1"
TIP
• Temporarily tighten the pinch bolts (lower
bracket).
• Do not tighten the pinch bolts (upper bracket)
yet.
2. Tighten:
• Damper assembly "1"
Damper assembly
30 Nm (3.0 m·kgf, 22 ft·lbf)
TIP
Use the cap bolt ring wrench "2" to tighten the
damper assembly.
Cap bolt ring wrench
90890-01501
YM-01501
1
3. Adjust:
• Front fork top end "a"
Front fork top end (standard) "a"
3 mm (0.12 in)
a
4. Tighten:
• Pinch bolt (upper bracket) "1"
Upper bracket pinch bolts
21 Nm (2.1 m·kgf, 15 ft·lbf)
• Pinch bolt (lower bracket) "2"
Lower bracket pinch bolts
21 Nm (2.1 m·kgf, 15 ft·lbf)
EWA
WARNING
Tighten the lower bracket to specified
torque. If torqued too much, it may cause
the front fork to malfunction.
1
2
4-49
FRONT FORK
2