Configuring The Default L2Tp Vpn Connection Example - ZyXEL Communications ZyWall USG 50-H Series User Manual

Chapter 25 L2TP VPN Example
Figure 284 VPN > IPSec VPN > VPN Gateway > Edit
• Configure the My Address setting. This example uses interface wan1 with static IP
address 172.16.1.2.
• Select Pre-Shared Key and configure a password. This example uses top-secret.
Click OK.
2 Click the Default_L2TP_VPN_GW entry's Enable icon and click Apply to turn on the
entry.
Figure 285 VPN > IPSec VPN > VPN Gateway (Enable)

25.3 Configuring the Default L2TP VPN Connection Example

1 Click VPN > Network > IPSec VPN to open the screen that lists the VPN connections.
Click the Default_L2TP_VPN_Connection's Edit icon.
370
ZyWALL USG 50-H User's Guide