L2Tp Vpn Example; Chapter 25 L2Tp Vpn Example; Configuring The Default L2Tp Vpn Gateway Example - ZyXEL Communications ZyWall USG 50-H Series User Manual

C
H A P T E R
This chapter shows how to create a basic L2TP VPN

25.1 L2TP VPN Example

This chapter uses the following settings in creating a basic L2TP VPN tunnel.
Figure 283 L2TP VPN Example
LAN_SUBNET: 192.168.1.x
• The ZyWALL's has a static IP address of 172.16.1.2 for the wan1 interface.
• The remote user has a dynamic public IP address and connects through the Internet.
• You configure an IP address pool object named L2TP_POOL to assign the remote users
IP addresses from 192.168.10.10 to 192.168.10.20 for use in the L2TP VPN tunnel.
• The VPN rule allows the remote user to access the LAN_SUBNET which covers the
192.168.1.x subnet.

25.2 Configuring the Default L2TP VPN Gateway Example

1 Click VPN > Network > IPSec VPN > VPN Gateway to open the screen that lists the
VPN gateways. Click the Default_L2TP_VPN_GW entry's Edit icon.
7. This feature is to be supported in firmware version 2.16(BDL.2).
ZyWALL USG 50-H User's Guide

L2TP VPN Example

172.16.1.2
25
7
tunnel.
L2TP_POOL:
192.168.10.10~192.168.10.20
369