Adding A Dns Service Control Rule; Www Overview - ZyXEL Communications ZyWall USG 50-H Series User Manual

Chapter 36 System
Table 200 System > DNS > MX Record Add (continued)
LABEL
OK
Cancel

36.5.10 Adding a DNS Service Control Rule

Click the Add icon in the Service Control table to add a service control rule.
Figure 417 System > DNS > Service Control Rule Add
The following table describes the labels in this screen.
Table 201 System > DNS > Service Control Rule Add
LABEL
Address Object
Zone
Action
OK
Cancel

36.6 WWW Overview

The following figure shows secure and insecure management of the ZyWALL coming in from
the WAN. HTTPS and SSH access are secure. HTTP, and Telnet access are not secure.
524
DESCRIPTION
Click OK to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving
DESCRIPTION
Select ALL to allow or deny any computer to send DNS queries to the ZyWALL.
Select a predefined address object to just allow or deny the computer with the IP
address that you specified to send DNS queries to the ZyWALL.
Select ALL to allow or prevent DNS queries through any zones.
Select a predefined zone on which a DNS query to the ZyWALL is allowed or
denied.
Select Accept to have the ZyWALL allow the DNS queries from the specified
computer.
Select Deny to have the ZyWALL reject the DNS queries from the specified
computer.
Click OK to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving
ZyWALL USG 50-H User's Guide