The Service Group Summary Screen - ZyXEL Communications ZyWall USG 50-H Series User Manual

Chapter 30 Services
Table 170 Object > Service > Service > Edit (continued)
LABEL
ICMP Type
IP Protocol
Number
OK
Cancel

30.3 The Service Group Summary Screen

The Service Group summary screen provides a summary of all service groups. In addition,
this screen allows you to add, edit, and remove service groups.
To access this screen, log in to the web configurator, and click Object > Service > Service
Group.
Figure 380 Object > Service > Service Group
The following table describes the labels in this screen. See
more information as well.
Table 171 Object > Service > Service Group
LABEL
#
Name
466
DESCRIPTION
This field appears if the IP Protocol is ICMP Type.
Select the ICMP message used by this service. This field displays the message
text, not the message number.
This field appears if the IP Protocol is User Defined.
Enter the number of the next-level protocol (IP protocol). Allowed values are 0 -
255.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
DESCRIPTION
This field is a sequential value, and it is not associated with a specific service
group.
This field displays the name of each service group.
Section 30.3.1 on page 467
ZyWALL USG 50-H User's Guide
for