The One-Time Schedule Add/Edit Screen - ZyXEL Communications ZyWall USG 50-H Series User Manual

31.2.1 The One-Time Schedule Add/Edit Screen

The One-Time Schedule Add/Edit screen allows you to define a one-time schedule or edit an
existing one. To access this screen, go to the Schedule screen (see
and click either the Add icon or an Edit icon in the One Time section.
Figure 383 Object > Schedule > Edit (One Time)
The following table describes the labels in this screen.
Table 174 Object > Schedule > Edit (One Time)
LABEL
Configuration
Name
Date Time
Start
Stop
OK
Cancel
ZyWALL USG 50-H User's Guide
DESCRIPTION
Type the name used to refer to the one-time schedule. You may use 1-31
alphanumeric characters, underscores(
cannot be a number. This value is case-sensitive.
Type the year, month, day, hour, and minute when the schedule begins.
Year - 1900 - 2999
Month - 1 - 12
Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Hour - 0 - 23
Minute - 0 - 59
All of these fields are required.
Type the year, month, day, hour, and minute when the schedule ends.
Year - 1900 - 2999
Month - 1 - 12
Day - 1 - 31 (it is not possible to specify illegal dates, such as February 31.)
Hour - 0 - 23
Minute - 0 - 59
All of these fields are required.
Click OK to save your changes back to the ZyWALL.
Click Cancel to exit this screen without saving your changes.
Chapter 31 Schedules
Section 31.2 on page
), or dashes (-), but the first character
_
470),
471