Table of Contents
Advertisement
Chapter 36 System
The following table describes the labels in this screen.
Table 203 System > Service Control Rule > Edit
LABEL
Address Object
Zone
Action
OK
Cancel
36.6.6 Customizing the WWW Login Page
Click System > WWW > Login Page to open the Login Page screen. Use this screen to
customize the Web Configurator login screen. You can also customize the page that displays
after an access user logs into the Web Configurator to access network services like the
Internet. See
Figure 422 System > WWW > Login Page
530
DESCRIPTION
Select ALL to allow or deny any computer to communicate with the ZyWALL using
this service.
Select a predefined address object to just allow or deny the computer with the IP
address that you specified to access the ZyWALL using this service.
Select ALL to allow or prevent any ZyWALL zones from being accessed using this
service.
Select a predefined ZyWALL zone on which a incoming service is allowed or
denied.
Select Accept to allow the user to access the ZyWALL from the specified
computers.
Select Deny to block the user's access to the ZyWALL from the specified
computers.
Click OK to save your customized settings and exit this screen.
Click Cancel to exit this screen without saving
Chapter 28 on page 443
for more on access user accounts.
ZyWALL USG 50-H User's Guide
Advertisement
Table of Contents
Troubleshooting
